Hack 1 Graphics too tight?
You can get up to 6mm of of additional material (3mm each side) by trimming the rubber beading as shown on opposite edges on the tight dimension
Trimming the beading softens the edge that the fabric bends around which loosens it slightly.
Hack 2 Graphics too loose?
Unpick the stitching, move the rubber beading in and Staple it to the fabric.
Hack 3 Prevent the fabric falling out with Jamming Shims
Did you know that you can use Silicone Edge Graphics for short term external applications?
By inserting these Jamming shims after installing the fabric prevents the SEG from coming out. This can be useful for installations when you want to get the top edge in without it falling out, but also you can use them to prevent the graphics coming out for external applications.
Click Here to order a set of 120 Jamming shims for $30+gst
For Other VivaSEG products Click Here
How to Install D51 or Cloud Extrusion without overstretching
The D51 or Cloud Fabric is a little more stretchy than other fabrics so care should be taken so as not to over stretch the fabric on installation.
